◎ SKU: 910456
◎ Name: Winnerwell® Lantern&Pipe Stand
◎ Material: Aluminum alloy for the main poles/guyline buckles
                AISI304 Stainless Steel for the tripod base/pegs/pipe 
                holders/lantern hooks
                Polyester for the container bags
                Nylon for the guy lines       
◎ Stowed Dimension: 120(L)mm×120(W)mm×710(H)mm/4.7(L)in×4.7(W)in×28(H)in
◎ Assembly Dimension: Maximum Height: 2600mm/102in
                Tripod Base: 650mm×550mm / 25.6in×21.7in
◎ Net Weight: Approx. 3.3kg/7.3lbs

※ 1×Guyline Peg Set (guyline×3, guyline buckle×3, peg×6, container bag×1) and 3×Lantern Hook are included. 

Tripod Base×1

Top Pole×1

Middle Pole×2

Guyline Peg Set (guyline×3, guyline 
buckle×3, peg×6, container bag×1)

Lantern Hook×3

Middle Pole Pipe Holder×2

Top Pole Pipe Holder×1

Container Bag×1

Please fully unfold it to this stopper position.

To fix with this bolt after the unfolding. 

 3. Assemble the needed numbers of Poles

After assembling the needed numbers of Middle Pole(s), be sure to assemble the Top Pole on the top.

 4. Assemble the Pipe Holders

The assembly positions are decided by the extension mode of the chimney pipe. 

Loosen the bolt and assemble as shown in the image. The Middle Pole Pipe Holder can only be assembled vertically. 

5. Assemble the Pipe

Screw the bolt to the end as shown in the image, and hang the chain in the back groove. Please make it as tight as possible. 

Screw the bolt to this direction to tighten the chain.

Attach the guy lines to the top three chains to fix.

The Tripod Base must be fixed with the Pegs. 

Different usages by the free set and adjusted angle of the Top Pole Pipe Holder