Instruction Manual
Winnerwell® Fire Guard Stove Table
 |
◎ SKU: 910427 ◎ Net Weight: Total: Approx. 10.73kg / 23.7lbs Table set: Approx. 9.57kg / 21.1lbs Container bag: Approx. 1.16kg / 2.56lbs |
|
1. Check before assembly To check if there are missing, damaged or abnormal parts.Frame×1 / Top board×1 / Mesh×1 / Leg×4 / Table top×4 / Container bag×1 |
 |
| 2. Place the frame with screws upwards |  |
| 3. Insert the leg into the frame as shown and fix it with screws |
It’s easier to keep balance with the second leg on the diagonal. |
 |
| 4. After assembling 4 legs, stand it up as shown |  |
5. Open the leg part and put the table top on
Please insert completely into the bottom of the support part.
 |
 |
 |
 |
It will cause the danger of falling off as shown. |  |
|
6. Complete the assembly Top board or mesh can be installed on the frame as required. You can also use the table set only without the top board or mesh. |
|
|
Height of the legs 6 heights adjustable |
|
6 heights adjustable From the top Height of table top
|
| It is compatible with a wide selection of products by adjusting the heights. | 
|
Assembly of wood stove (sold separately)
| Removing one piece of the table top will make the assembly more smoothly. | 
|
| It will be easier to add wood when the table top on the side of the stove door is removed, but you can also add wood without removing the table top. |  |
■ PRECAUTIONS FOR USE
Please read the “Precautions for Use” in this manual carefully and fully understand it before use.
Please keep this paper properly for the convenience of reading before each use.
■ NOTICE
● Remember to wear gloves when assembling to prevent injury.
● Do not use it on uneven or soft ground to avoid injury or product damage.
● This is a camping item, please do not use it for other purposes or transform it.
● Please select a flat, well-drained and little-wind place to use the product.
● Please note that the product will get discolored, deformed or damaged after contacting directly with flames or charcoals.
● If use the product indoors, please do not use it on the wood floor or other easily damaged floor.
● Please note that the stainless steel will also rust if you place things like iron cans on the table top for a long time in the condition of wet table top.
● Do not sit or stand on the table, or use it as a pedal.
● Please avoid the operation that will produce a rapid impact force on the product.
● Please do not use the product when 4 legs do not fully touch the ground, which will cause extreme load on the part of the product.
● For first-time use, please assemble the product in advance to confirm whether there is any abnormality.
● Please confirm that all parts are assembled properly before use.
● If the product is used without proper assembly, it will cause product damage or injury.
● Do not expose the product to the sun for a long time or use it in rainy days, otherwise it will cause deterioration such as rust or get damaged.
● Please check if there are missing, deformed or damaged parts before use, do not use if there’s any abnormality.
● Do not allow children to use it alone. Adults should always check and make sure it is safe.
● Do not use brute strength or violent force when assembling.
● Do not use the product in strong wind, please keep an eye on the weather change during the use.
● To ensure safety, please use the product within the scope of your eyes. Please put it away before you leave.
● It is not a standing product, if placed under assembling for a long term, it will cause the problems of reducing quality or service life.
● Please clean it after use and store it after drying.
● If keep the product with dirt or in wet, it will lead to metal corrosion or damage of resin part.
● When store the product, please keep away from the environment of high temperature, humidity and direct sunlight.
● Do not use the liquids such as alcohol, thinners, volatile oils and gasoline etc.